Elektroberechnungen9.2.1 - App Store
Sie können Ergebnisse sehen in einige Sekunden.
Herausgeberbeschreibung
Elektroberechnungen ist die PROFESSIONELLE App für alle, die täglich mit Elektroanlagen arbeiten: planen, dimensionieren und prüfen Sie in wenigen Sekunden, auf der Baustelle oder im Büro. Über 200 Berechnungen, Schaltpläne, Formeln und Tabellen in einer einzigen App, mit klaren und druckbaren PDF-Berichten zum Anhängen an Ihre Dokumente.
Entwickelt für Elektriker, Installateure, Planer und Techniker, spart sie Ihnen Zeit und hilft, Fehler zu vermeiden: von der Berechnung des Kabelquerschnitts bis zum Kurzschluss.
NORMKONFORM
Zuverlässige Ergebnisse im Einklang mit den wichtigsten Normen: IEC (International Electrotechnical Commission), CEI (Italienisches Elektrotechnisches Komitee), NEC (National Electrical Code), CEC (Canadian Electrical Code).
WARUM DIESE APP
ZEIT SPAREN: Berechnungen, die Sie von Hand machen würden, sofort verfügbar.
FEHLER VERMEIDEN: geprüfte Formeln und aktuelle normative Parameter.
PROFESSIONELLE BERICHTE: PDF-Berichte, bereit zum Drucken und Archivieren.
IMMER DABEI: über 200 Werkzeuge – Berechnungen, Umrechner, Tabellen und Pinbelegungen.
DIE MEISTGENUTZTEN BERECHNUNGEN
Berechnung des Kabelquerschnitts und Abstimmung mit der Schutzeinrichtung, Spannungsfall, Betriebsstrom, Stromstärke, Spannung und Leistung (Wirk-, Blind-, Scheinleistung). Leistungsfaktor und Blindleistungskompensation. Strombelastbarkeit von Leitern und Sammelschienen, Dimensionierung von Rohren und Kanälen, maximale Kabellänge.
KURZSCHLUSS UND SCHUTZ
Kurzschlussstrom an einem Punkt der Leitung, Erdungsanlage und Abstimmung mit dem FI-Schutzschalter, Schutz des Kabels gegen Kurzschluss (K²S²), Leistungsverlust, Kabeltemperatur, Strom im Neutralleiter.
ELEKTROMOTOR
Strom, Leistung, Spannung, Wirkungsgrad und Leistungsfaktor des Motors, Schlupf, Drehzahl, maximales Drehmoment und Nennstrom bei Volllast. Anschlusspläne des Drehstrommotors, Klemmenbezeichnung. Von Drehstrom auf Wechselstrom.
ELEKTRONIK
Farb- und alphanumerische Codes von Widerständen, Kondensatoren und Spulen, SMD-Code, Vorwiderstand für LED, Spannungs- und Stromteiler, Zenerdiode, Batterielaufzeit, Resonanzfrequenz, Sicherungen und Transformatoren.
UMRECHNUNGEN
Dreieck-Stern, AWG, SWG, Querschnitt, Länge, Energie, Temperatur, Druck, Ah/kWh, var/µF, Gauss/Tesla, U/min und vieles mehr.
RESSOURCEN UND TABELLEN
Auslösekennlinien, Reaktanz und spezifischer Widerstand von Kabeln, Abmessungen und Gewicht von Kabeln, Verteilungssysteme (TT, TN, IT), Schutzarten IP/IK/NEMA, ATEX-Kennzeichnung, Isolationsklassen, elektrische Symbole, ANSI-Gerätecodes, Stecker und Steckdosen, Steckverbinder IEC 60309, NEMA und EV-Ladestecker, SI-Präfixe und Maßeinheiten, Thermistoren und Thermoelemente.
PINBELEGUNGEN
Ethernet RJ-45, Ethernet mit PoE, USB, HDMI, VGA, DVI, RS-232, FireWire, SATA, DisplayPort, Apple Lightning, Raspberry Pi, OBD II, XLR Audio/DMX, MIDI, Jack, RCA, Thunderbolt, SD-Karte, SIM-Karte und LED.
Hören Sie auf, überall nach Formeln und Tabellen zu suchen: PACKEN SIE IHR GESAMTES ELEKTROLABOR IN IHR SMARTPHONE. Laden Sie Elektroberechnungen herunter und arbeiten Sie schneller, mit normkonformen Ergebnissen.
Terms of service (EULA): https://www.egalnetsoftwares.com/terms_of_service_app/
Über Elektroberechnungen
Das Unternehmen, das Elektroberechnungen entwickelt, ist Egal Net di Ettore Gallina. Die neueste vom Entwickler veröffentlichte Version ist 9.2.1.
Um Elektroberechnungen auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-10-23 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann Elektroberechnungen als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie Elektroberechnungen auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald Elektroberechnungen im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem Elektroberechnungen heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 9.2.1
veröffentlicht am 2026-10-23
* Upd: Updated the NEC 2026 normative references
* Fix: Busbar ampacity: shape factor removed
* Fix: NEC calculations: 10 A circuit breakers, EGC sizing with voltage drop, conduit fill and two-phase ampacity
* Fix: Earthing system: added the 6 mA residual current sensitivity (IEC 61008-1/61009-1)
Version 9.2.0
veröffentlicht am 2026-10-13
Version History * New: Analog signals with 0-5 V, 1-5 V and 2-10 V ranges
* New: Added type C and A thermocouples
* New: Added SI prefixes ronna, quetta, ronto and quecto
* Fix: In the IEC current-carrying capacity calculation, buried installations (D1/D2) now use the derating factors from tables B.52.18 and B.52.19
* Fix: CEI cable sizing and cable temperature for spaced single-core cables (installation methods 13–16)
* Fix: NEC and CEC calculations now apply the rules for grouped conductors, parallel conductors and small conductor protection
* Fix: Voltage drop with distributed loads in three-phase and two-phase (also in cable sizing)
* Fix: CEC cable-protection coordination: in free air the 70%/85% limit applies to conductors only (Rule 8-104)
* Fix: Design current: efficiency and voltage always applied
* Fix: Conduit and trunking sizing: CEC sizes from 500 kcmil now match the tables
* Fix: Minimum Isc and maximum length: B/C/D magnetic trip thresholds and parallel conductors
* Fix: Maximum cable length (ΔV): the cable type (single-core/multi-core) is now taken into account
* Fix: Correct resistor colors for 8.2 Ω and other standard values, and the standard values table no longer shows 8.19 Ω
* Fix: Motor calculations and design current: efficiency is no longer applied to power in VA and var
* Fix: Correct busbar ampacity with temperature rise above 30 °C and with painted bars wider than 50 mm
* Fix: Busbar ampacity: the suggested spacing is the bar thickness, with its unit of measure
* Fix: SMD resistor and capacitor codes: invalid codes now show an error instead of a wrong value
* Fix: Improved capacitor code decoding: voltages, tolerances and new formats
* Fix: Conversion accuracy
* Fix: Bare conductor ampacity: no crash when changing installation method (CEI) and correct temperature factors (NEC)
* Fix: Specific energy K²S²: correct IEC values for PVC above 300 mm²
* Fix: Parallel impedance: the correct value is now calculated
* Fix: Reactance: the capacitance calculation asks for the frequency again
* Fix: Power factor correction: correct capacitance when the capacitor rated voltage differs from the supply voltage
* Fix: Earthing system: mesh calculated from sides a and b
* Fix: Correct power losses with distributed loads
* Fix: Fuses: 4-band code per IEC 60127 and corrected data for Neozed, NH and automotive fuses
* Fix: LED resistor: in parallel the value is calculated for each LED as shown in the diagram
* Fix: Battery life: correct runtime with depth of discharge below 100%
* Fix: CCTV: storage and bandwidth in SI units (decimal GB/TB and Mbit/s), added AV1 and up to 60 fps
* Fix: Temperature sensors: corrected type K thermocouple voltage, PT/CU temperatures below 0 °C and entry of negative voltages
* Fix: Joule effect: time accepts decimals
* Fix: Single-phase motor run capacitor calculation
* Fix: Motor NEC FLC now matches the tables at 230/460 V and at 120/240/480 V system voltages
* Fix: AWG table up to 2000 kcmil, more accurate SWG diameters and corrected imperial/metric comparison
* Fix: Angle and RPM conversions: no more 60'' seconds, radius required for linear speed
* Fix: Corrected E192 standard values and Class G fuse voltage; added battery fuses (IEC 60269-7)
* Fix: Resistivity table: corrected nickel, zinc, constantan and nichrome values
* Fix: Cable dimensions and weight: wrong diameters and weights corrected
* Fix: Degree of protection: IP digit 0 is back (IP20, IP40…), IK01 = 0.14 J and NEMA → IP equivalents per NEMA 250
* Fix: ATEX marking: added current protection codes; ethanol in group IIB
* Fix: Correct names in CCTV resolutions
* Fix: Electricity around the world: removed obsolete 110/127 V networks and corrected the sockets of several countries
* Fix: C-Form sockets: correct voltages for 5-pin sockets and poles for 12h sockets
* Fix: NEMA connectors: three-phase series now shown (3Ø 250 V, 3ØY 120/208 V)
* Fix: Wiring color codes: IEC DC negative conductor is white (IEC 60445:2021)
* Fix: EV connectors: Tesla 9.2.0 1d ago * Mod: Improved license management
* Fix: Conduit filling ignored in "Conduit and cable tray sizing IEC/CEI"
* Mod: Improved some translations
* Fix: Focus does not select cell 9.1.2 Aug 24 * Mod: Updated images of sockets around the world
* Mod: Improved chatbot support and moved to a more visible position 9.1.1 Jul 20 * Mod: Native ads instead of interstitials
* Mod: Improved some results layouts
* Mod: Thorough review of translations
* Fix: Flowchart in the dark-themed section calculation formulas
* Fix: Crash in calculating the maximum cable length with AWG/kcmil size
* Fix: Dropdown with RTL languages
* Fix: Main view width with RTL languages
* Fix: Crash when selecting a calculation with an index that is no longer valid
* Fix: L- wire nomenclature (Morocco DC) 9.1.0 Jul 5 * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024
Version 9.1.2
veröffentlicht am 2026-10-06
Version History * Mod: Improved license management
* Fix: Conduit filling ignored in "Conduit and cable tray sizing IEC/CEI"
* Mod: Improved some translations
* Fix: Focus does not select cell 9.1.2 Aug 24 * Mod: Updated images of sockets around the world
* Mod: Improved chatbot support and moved to a more visible position 9.1.1 Jul 20 * Mod: Native ads instead of interstitials
* Mod: Improved some results layouts
* Mod: Thorough review of translations
* Fix: Flowchart in the dark-themed section calculation formulas
* Fix: Crash in calculating the maximum cable length with AWG/kcmil size
* Fix: Dropdown with RTL languages
* Fix: Main view width with RTL languages
* Fix: Crash when selecting a calculation with an index that is no longer valid
* Fix: L- wire nomenclature (Morocco DC) 9.1.0 Jul 5 * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024 * Fix: Crash when selecting an installation type when choosing a protective device
* Fix: Crash when showing multiple conductors in parallel in advanced section calculation
* Fix: Crash when the NEC wire size calculation results a neutral wire greater than 2000 kcmil
* Upd: General update of the languages 7.2.1 11/28/2024
Version 9.1.1
veröffentlicht am 2026-08-22
Version History * Mod: Updated images of sockets around the world
* Mod: Improved chatbot support and moved to a more visible position 9.1.1 Jul 20 * Mod: Native ads instead of interstitials
* Mod: Improved some results layouts
* Mod: Thorough review of translations
* Fix: Flowchart in the dark-themed section calculation formulas
* Fix: Crash in calculating the maximum cable length with AWG/kcmil size
* Fix: Dropdown with RTL languages
* Fix: Main view width with RTL languages
* Fix: Crash when selecting a calculation with an index that is no longer valid
* Fix: L- wire nomenclature (Morocco DC) 9.1.0 Jul 5 * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024 * Fix: Crash when selecting an installation type when choosing a protective device
* Fix: Crash when showing multiple conductors in parallel in advanced section calculation
* Fix: Crash when the NEC wire size calculation results a neutral wire greater than 2000 kcmil
* Upd: General update of the languages 7.2.1 11/28/2024 * New: Calculation of wire size and coordination of protection device
* Add: Flowchart in wire size calculation formula
* Mod: The short-circuit cosφ is automatically displayed when setting the upstream short-circuit current
* Mod: Improved formula for selecting NEC/CEC protection device
* Mod: Improved awg/kcmil conductor resistance calculation
* Fix: In NEC/CEC calculations continuous loads or non-continuous loads can accept the value 0
* Fix: Reduction factor for conductors in parallel NEC/CEC
* Fix: Calculated load according to Rule 8-104 (CEC)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Czech language (by Skipy)
* Upd: General update of the languages 7.2.0 11/25/2024
Version 9.1.1
veröffentlicht am 2026-07-27
Version History * Mod: Updated images of sockets around the world
* Mod: Improved chatbot support and moved to a more visible position 9.1.1 6d ago * Mod: Native ads instead of interstitials
* Mod: Improved some results layouts
* Mod: Thorough review of translations
* Fix: Flowchart in the dark-themed section calculation formulas
* Fix: Crash in calculating the maximum cable length with AWG/kcmil size
* Fix: Dropdown with RTL languages
* Fix: Main view width with RTL languages
* Fix: Crash when selecting a calculation with an index that is no longer valid
* Fix: L- wire nomenclature (Morocco DC) 9.1.0 Jul 5 * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024 * Fix: Crash when selecting an installation type when choosing a protective device
* Fix: Crash when showing multiple conductors in parallel in advanced section calculation
* Fix: Crash when the NEC wire size calculation results a neutral wire greater than 2000 kcmil
* Upd: General update of the languages 7.2.1 11/28/2024 * New: Calculation of wire size and coordination of protection device
* Add: Flowchart in wire size calculation formula
* Mod: The short-circuit cosφ is automatically displayed when setting the upstream short-circuit current
* Mod: Improved formula for selecting NEC/CEC protection device
* Mod: Improved awg/kcmil conductor resistance calculation
* Fix: In NEC/CEC calculations continuous loads or non-continuous loads can accept the value 0
* Fix: Reduction factor for conductors in parallel NEC/CEC
* Fix: Calculated load according to Rule 8-104 (CEC)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Czech language (by Skipy)
* Upd: General update of the languages 7.2.0 11/25/2024
Version 9.1.0
veröffentlicht am 2026-07-20
Version History * Mod: Native ads instead of interstitials
* Mod: Improved some results layouts
* Mod: Thorough review of translations
* Fix: Flowchart in the dark-themed section calculation formulas
* Fix: Crash in calculating the maximum cable length with AWG/kcmil size
* Fix: Dropdown with RTL languages
* Fix: Main view width with RTL languages
* Fix: Crash when selecting a calculation with an index that is no longer valid
* Fix: L- wire nomenclature (Morocco DC) 9.1.0 Jul 5 * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024 * Fix: Crash when selecting an installation type when choosing a protective device
* Fix: Crash when showing multiple conductors in parallel in advanced section calculation
* Fix: Crash when the NEC wire size calculation results a neutral wire greater than 2000 kcmil
* Upd: General update of the languages 7.2.1 11/28/2024 * New: Calculation of wire size and coordination of protection device
* Add: Flowchart in wire size calculation formula
* Mod: The short-circuit cosφ is automatically displayed when setting the upstream short-circuit current
* Mod: Improved formula for selecting NEC/CEC protection device
* Mod: Improved awg/kcmil conductor resistance calculation
* Fix: In NEC/CEC calculations continuous loads or non-continuous loads can accept the value 0
* Fix: Reduction factor for conductors in parallel NEC/CEC
* Fix: Calculated load according to Rule 8-104 (CEC)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Czech language (by Skipy)
* Upd: General update of the languages 7.2.0 11/25/2024 * Fix: Crash when viewing an advertisement 7.1.1 10/22/2024
Version 9.0.8
veröffentlicht am 2026-06-30
Version History * ReFix: Crash in some converters
* Fix: Crash in "UL/CSA Fuse Ratings" on iPad 9.0.8 May 7 * Fix: Crash in some converters 9.0.7 May 6 * Mod: Differentiation between HP (Imperial Horsepower) and CV (Metric Horsepower)
* Fix: Selecting the type of installation in "Wire size with distributed loads (IEC)"
* Fix: Added flowchart to wire size calculation formulas
* Fix: Checking the ampacity when calculating the maximum cable length with voltage drop
* Mod: Improved TableView efficiency 9.0.6 May 5 * Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages 9.0.5 Mar 3 * Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 9.0.4 Jan 12 * Fix: Crash when selecting CEC standard in channel fill calculation 9.0.3 11/07/2025 * Mod: Improved data (size and weight) for CEI, IEC, and harmonized cables
* Mod: Channel fill calculation now fully supports the CEI standard
* Upd: Macedonian language (by Dragančo Velkov) 9.0.2 11/05/2025 * Upd: General update of the languages 9.0.1 09/30/2025 * Add: Full compatibility with iOS 26
* Fix: Updating of available wire sizes based on the type of installation when choosing the CEI protection device
* Fix: Fixed a crash when calculating voltage drop with distributed loads using a multicore cable
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Russian language (by Djek-Energetik)
* Upd: Persian language (by Sajad Sahragard)
* Upd: General update of the languages 9.0.0 09/22/2025 * New: The app now supports CEI standards in addition to the international IEC ones
* New: Voltage drop calculation with equally distributed loads
* New: Wire size calculation with equally distributed loads
* New: Possibility to select 4 loaded conductors in the current carrying capacity calculation
* Mod: Improved ground resistance calculation
* Mod: Copper resistivity is now set to 0.01851 Ω*mm²/m for short-circuit current calculations
* Fix: Ads volume
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Hamad Houcine and هزيم الرعد)
* Upd: Simplified Chinese language (by Jeven)
* Upd: Romanian language (by Pătrașcu Laurențiu) 8.0.0 09/15/2025 * Mod: Minor graphic improvements
* Upd: General update of the languages 7.5.2 07/15/2025 * Fix: Viewing the Tab Bar on iPad 7.5.1 06/24/2025 * New: Calculation of the maximum length of the cable protected from short-circuit
* New: Device acronyms
* Mod: The default load surcharge is now set to 0% to avoid oversizing the cable
* Fix: Settings row height
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari) 7.5.0 06/23/2025 * Upd: The guide is now also translated into other languages 7.4.3 06/11/2025 * Fix: The conductor resistance calculation did not take frequency into account
* Upd: Updated some external libraries
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Polish language (by Adamszopki)
* Upd: General update of the languages 7.4.2 05/26/2025 * Mod: Improved unit voltage drop table
* Mod: Improved IEC cable reactance table
* Mod: Improved cable resistance / reactance / impedance calculation
* Mod: Improved images of tripping curves
* Mod: Improved and expanded IEC electrical symbols
* Fix: Tripping curves with dark theme
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Tamil language (by Tamizharasan)
* Upd: Portuguese [BR] language (by Murillo Gumiero)
* Upd: Hebrew language (by Arken)
* Upd: General update of the languages 7.4.1 05/05/2025 * New: Protection for emergency lighting lines 7.4.0 04/01/2025 * Fix: Fixed keyboard distance from safe area
* Mod: Improved guidance on full load current of motors (NEC) 7.3.1 03/18/2025 * Add: Ability to search for installation method by name or description
* Mod: Small improvements
* Mod: Bottom sheet
* Add: Support for floating keyboard
* Mod: Improved license captions
* Mod: Migration to Gemini 2.0 for chatbot
* Mod: The terms of service are more prominent
* Upd: Traditional Chinese language (by king)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages 7.3.0 03/10/2025 * Mod: Improved the calculation of the design current
* Upd: Updated some external libraries 7.2.3 01/08/2025 * Fix: Reduced neutral and protection conductors in parallel when exceeding 6000A (NEC and CEC)
* Fix: Displaying awg sizes in the picker
* Mod: Improved purchase management
* Upd: Simplified Chinese language (by wangwei)
* Upd: Macedonian language (by Dragančo Velkov) 7.2.2 12/09/2024 * Fix: Crash when selecting an installation type when choosing a protective device
* Fix: Crash when showing multiple conductors in parallel in advanced section calculation
* Fix: Crash when the NEC wire size calculation results a neutral wire greater than 2000 kcmil
* Upd: General update of the languages 7.2.1 11/28/2024 * New: Calculation of wire size and coordination of protection device
* Add: Flowchart in wire size calculation formula
* Mod: The short-circuit cosφ is automatically displayed when setting the upstream short-circuit current
* Mod: Improved formula for selecting NEC/CEC protection device
* Mod: Improved awg/kcmil conductor resistance calculation
* Fix: In NEC/CEC calculations continuous loads or non-continuous loads can accept the value 0
* Fix: Reduction factor for conductors in parallel NEC/CEC
* Fix: Calculated load according to Rule 8-104 (CEC)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: Arabic language (by Majed Al-Shagdari)
* Upd: Czech language (by Skipy)
* Upd: General update of the languages 7.2.0 11/25/2024 * Fix: Crash when viewing an advertisement 7.1.1 10/22/2024 * New: Cable protection from short-circuit
* Mod: Improved calculation of minimum short-circuit current
* Mod: Dark and Tint app icon
* Mod: Improved some bar button icons
* Fix: Closing interstitial ads
* Add: Albanian and Uzbek languages
* Upd: AdMob SDK 7.1.0 10/21/2024
Version 9.0.5
veröffentlicht am 2026-03-03
* Mod: Improved calculation of the bars ampacity
* Mod: Improved IEC protection device selection when using fuses with rated current less than 16A
* Add: Guide on safe operating currents for circuit breakers and fuses
* Add: Support for IEC circuit breakers up to 6300
* Mod: Single power factor in settings
* Fix: Corrected the layout "size and weight" of NEC cables
* Upd: Arabic language (by Abd Al Aziz)
* Upd: General update of the languages
Version 9.0.4
veröffentlicht am 2026-01-12
* Imp: The standard is automatically selected (when possible)
* Imp: Together with the type of installation, the type of cable (single-core / multi-core) is also shown
* Upd: Updated some external libraries
* Upd: Chatbot model updated to Gemini 2.5
* Upd: Russian language (by Djek-Energetik)
* Upd: Macedonian language (by Dragančo Velkov)
* Upd: General update of the languages
Version 9.0.1
veröffentlicht am 2025-09-30
Sep 30, 2025
Version 9.0.1
* Upd: General update of the languages
Haftungsausschluss
Offizieller App Store-Link
Wir hosten Elektroberechnungen nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.
Der App-Store-Link für Elektroberechnungen wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.
Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.



